Design and experimental characterization of a tunable vibration-based electromagnetic micro-generator

Vibration-based micro-generators, as an alternative source of energy, have become increasingly significant in the last decade. This paper presents a new tunable electromagnetic vibration-based micro-generator. Frequency tuning is realized by applying an axial tensile force to the micro-generator. The dimensions of the generator, especially the dimensions of the coil and the air gap between magnets, have been optimized to maximize the output voltage and power of the micro-generator. The resonant frequency has been successfully tuned from 67.6 to 98 Hz when various axial tensile forces were applied to the structure. The generator produced a power of 61.6–156.6 µW over the tuning range when excited at vibrations of 0.59 ms-2. The tuning mechanism has little effect on the total damping. When the tuning force applied on the generator becomes larger than the generator’s inertial force, the total damping increases resulting in reduced output power. The resonant frequency increases less than indicated from simulation and approaches that of a straight tensioned cable when the force associated with the tension in the beam becomes much greater than the beam stiffness. The test results agree with the theoretical analysis presented

General model with experimental validation of electrical resonant frequency tuning of electromagnetic vibration energy harvesters

This paper presents a general model and its experimental validation for electrically tunable electromagnetic energy harvesters. Electrical tuning relies on the adjustment of the electrical load so that the maximum output power of the energy harvester occurs at a frequency which is different from the mechanical resonant frequency of the energy harvester. Theoretical analysis shows that for this approach to be feasible the electromagnetic vibration energy harvester’s coupling factor must be maximized so that its resonant frequency can be tuned with the minimum decrease of output power. Two different-sized electromagnetic energy harvesters were built and tested to validate the model. Experimentally, the micro-scale energy harvester has a coupling factor of 0.0035 and an untuned resonant frequency of 70.05 Hz. When excited at 30 mg, it was tuned by 0.23 Hz by changing its capacitive load from 0 to 4000 nF; its effective tuning range is 0.15 Hz for a capacitive load variation from 0 to 1500 nF. The macro-scale energy harvester has a coupling factor of 552.25 and an untuned resonant frequency of 95.1 Hz and 95.5 Hz when excited at 10 mg and 25 mg, respectively. When excited at 10 mg, it was tuned by 3.8 Hz by changing its capacitive load from 0 to 1400 nF; it has an effective tuning range of 3.5 Hz for a capacitive load variation from 0 to 1200 nF. When excited at 25 mg, its resonant frequency was tuned by 4.2 Hz by changing its capacitive load from 0 to 1400 nF; it has an effective tuning range of about 5 Hz. Experimental results were found to agree with the theoretical analysis to within 10%

Photophysics and electrochemistry of a platinum-acetylide disubstituted perylenediimide

The synthesis and photophysical study of a perylene diimide (PDI) functionalised with platinum acetylide units of the type, trans{–C[triple bond, length as m-dash]C–Pt(PBu3)2–C[triple bond, length as m-dash]C–Ph} and comparison with a phenylacetylide substituted model compound are reported. The model compound demonstrates typical perylene absorption and photoluminescence spectra characteristic of singlet excited state formation and decay. The Pt-substitution, however, appears to induce spin–orbit coupling into the chromophore and giving rise to a triplet excited state which was confirmed by transient absorption measurements. This excited state is quenched by oxygen, leading to the formation of singlet oxygen in dichloromethane, recorded by time-resolved near-infrared luminescence measurements

Centile charts for birthweight for gestational age for Scottish singleton births

<p>Abstract</p> <p>Background</p> <p>Centile charts of birthweight for gestational age are used to identify low birthweight babies. The charts currently used in Scotland are based on data from the 1970s and require updating given changes in birthweight and in the measurement of gestational age since then.</p> <p>Methods</p> <p>Routinely collected data of 100,133 singleton births occurring in Scotland from 1998–2003 were used to construct new centile charts using the LMS method.</p> <p>Results</p> <p>Centile charts for birthweight for sex and parity groupings were constructed for singleton birth and compared to existing charts used in Scottish hospitals.</p> <p>Conclusion</p> <p>Mean birthweight has been shown to have increased over recent decades. The differences shown between the new and currently used centiles confirm the need for more up-to-date centiles for birthweight for gestational age.</p

UPF201 Archaeal Specific Family Members Reveal Structural Similarity to RNA-Binding Proteins but Low Likelihood for RNA-Binding Function

We have determined X-ray crystal structures of four members of an archaeal specific family of proteins of unknown function (UPF0201; Pfam classification: DUF54) to advance our understanding of the genetic repertoire of archaea. Despite low pairwise amino acid sequence identities (10–40%) and the absence of conserved sequence motifs, the three-dimensional structures of these proteins are remarkably similar to one another. Their common polypeptide chain fold, encompassing a five-stranded antiparallel β-sheet and five α-helices, proved to be quite unexpectedly similar to that of the RRM-type RNA-binding domain of the ribosomal L5 protein, which is responsible for binding the 5S- rRNA. Structure-based sequence alignments enabled construction of a phylogenetic tree relating UPF0201 family members to L5 ribosomal proteins and other structurally similar RNA binding proteins, thereby expanding our understanding of the evolutionary purview of the RRM superfamily. Analyses of the surfaces of these newly determined UPF0201 structures suggest that they probably do not function as RNA binding proteins, and that this domain specific family of proteins has acquired a novel function in archaebacteria, which awaits experimental elucidation

Appearance of dark neurons following anodal polarization in the rat brain.

An anodal direct current of 3.0 microA or 30.0 microA was unilaterally applied for 30 min or 3 h to the surface of the sensorimotor cortex of rats, and the effects of polarization on the morphology of brain cells were examined by light microscopy. After five repeated anodal polarization trials, dark neurons appeared mainly in the polarized neocortex regardless of the intensity and duration of the polarizing currents. Such dark neurons were scarce in the control animals or the animals receiving only one trial of polarization. The dark neurons were most abundant in the second to fourth layers of the ipsilateral superior-lateral convexity of the frontal cortex, but a few were present in the contralateral cortex. The dark neurons began to appear 24 h after the last polarization; thereafter almost all of these neurons gradually reverted to their normal morphological profiles through a transitory state within 1 month of the last trial of repeated polarization. No morphological changes were apparent in any of the brain structures other than the cerebral cortex. These findings indicate that repeated anodal polarization has reversible morphological effects on the cortical neurons, suggesting that the appearance of dark neurons after anodal polarization is an important index for evaluation of cortical plastic change induced by polarization.</p

Convalescent plasma in patients admitted to hospital with COVID-19 (RECOVERY): a randomised controlled, open-label, platform trial

SummaryBackground Azithromycin has been proposed as a treatment for COVID-19 on the basis of its immunomodulatoryactions. We aimed to evaluate the safety and efficacy of azithromycin in patients admitted to hospital with COVID-19.Methods In this randomised, controlled, open-label, adaptive platform trial (Randomised Evaluation of COVID-19Therapy [RECOVERY]), several possible treatments were compared with usual care in patients admitted to hospitalwith COVID-19 in the UK. The trial is underway at 176 hospitals in the UK. Eligible and consenting patients wererandomly allocated to either usual standard of care alone or usual standard of care plus azithromycin 500 mg once perday by mouth or intravenously for 10 days or until discharge (or allocation to one of the other RECOVERY treatmentgroups). Patients were assigned via web-based simple (unstratified) randomisation with allocation concealment andwere twice as likely to be randomly assigned to usual care than to any of the active treatment groups. Participants andlocal study staff were not masked to the allocated treatment, but all others involved in the trial were masked to theoutcome data during the trial. The primary outcome was 28-day all-cause mortality, assessed in the intention-to-treatpopulation. The trial is registered with ISRCTN, 50189673, and ClinicalTrials.gov, NCT04381936.Findings Between April 7 and Nov 27, 2020, of 16 442 patients enrolled in the RECOVERY trial, 9433 (57%) wereeligible and 7763 were included in the assessment of azithromycin. The mean age of these study participants was65·3 years (SD 15·7) and approximately a third were women (2944 [38%] of 7763). 2582 patients were randomlyallocated to receive azithromycin and 5181 patients were randomly allocated to usual care alone. Overall,561 (22%) patients allocated to azithromycin and 1162 (22%) patients allocated to usual care died within 28 days(rate ratio 0·97, 95% CI 0·87–1·07; p=0·50). No significant difference was seen in duration of hospital stay (median10 days [IQR 5 to >28] vs 11 days [5 to >28]) or the proportion of patients discharged from hospital alive within 28 days(rate ratio 1·04, 95% CI 0·98–1·10; p=0·19). Among those not on invasive mechanical ventilation at baseline, nosignificant difference was seen in the proportion meeting the composite endpoint of invasive mechanical ventilationor death (risk ratio 0·95, 95% CI 0·87–1·03; p=0·24).Interpretation In patients admitted to hospital with COVID-19, azithromycin did not improve survival or otherprespecified clinical outcomes. Azithromycin use in patients admitted to hospital with COVID-19 should be restrictedto patients in whom there is a clear antimicrobial indication

Improving the piezoelectric properties of thick-film PZT: the influence of paste composition, powder milling process and electrode material

This paper details improvements of the d33 coefficient for thick-film Lead–Zirconate–Titanate (PZT) layers. In particular, the effect that the powder milling process has on particle size, shape and distribution has been investigated. Ball milled, jet milled and attritor milled powders were obtained from Morgan Electro-Ceramics Ltd. These powders were mixed with various ratios of lead borosilicate glass in the range of 5–20% by weight and an appropriate quantity of Electro-Science Laboratories (ESL) 400 solvent to formulate a screen printable thixotropic paste. The use of a polymer top electrode to reduce the number of firing cycles the PZT layer is subjected to was also investigated. The results show that the highest values of d33 were obtained from the ball milled powder with 10% glass content, but the most consistent results were obtained from the attritor milled samples. The samples printed with a polymer top electrode have shown an average increase of around 15% in the value of d33

Investigation into the uniqueness of neonate transient otoacoustic emissions

This work presents initial findings from an investigation into the use of otoacoustic emissions (OAEs) for identifying individuals.A data set of 2009 neonate transient otoacoustic emissions was quantified for uniqueness using the Euclidean distance separation of the power spectra. Each sample was compared to all the others and the minimum separation recorded. The percentage separation for 50%, 95%, and 99% of the sample set was calculated and the distribution of the minimum separation plotted. The minimum separation between samples was 1.84% while 99% of the samples had a separation of 3.68%.A simple technique was able to achieve a separation of 3.68% for 99% of the data set, indicating it is highly likely that otoacoustic emissions are unique to an individual and of potential use as a biometric variable in an identification system